Timing Report
Lattice Timing Report - Setup and Hold, Version Radiant Software (64-bit) 2024.2.1.330.0
Wed Nov 26 16:16:05 2025
Copyright (c) 1991-1994 by NeoCAD Inc. All rights reserved.
Copyright (c) 1995 AT&T Corp. All rights reserved.
Copyright (c) 1995-2001 Lucent Technologies Inc. All rights reserved.
Copyright (c) 2001 Agere Systems All rights reserved.
Copyright (c) 2002-2024 Lattice Semiconductor Corporation, All rights reserved.
Command line: timing -sethld -v 10 -u 10 -endpoints 10 -nperend 1 -sp 9_High-Performance_1.0V -hsp m -pwrprd -html -rpt full_adder_RD_impl_1.twr full_adder_RD_impl_1.udb -gui -msgset C:/USM Reference Designs (with PDC)/Full_adder_Reference Design/full_adder_RD/promote.xml
-------------------------------------------
Design: top
Family: LFCPNX
Device: LFCPNX-100
Package: LFG672
Performance: 9_High-Performance_1.0V
Package Status: Final Version 16
Performance Hardware Data Status : Final Version 3.9
-------------------------------------------
=====================================================================
Table of Contents
=====================================================================
1 Timing Overview
1.1 SDC Constraints
1.2 Constraint Coverage
1.3 Overall Summary
1.4 Unconstrained Report
1.5 Combinational Loop
2 Setup at Speed Grade 9_High-Performance_1.0V Corner at 100 Degrees
2.1 Clock Summary
2.2 Endpoint slacks
2.3 Detailed Report
3 Setup at Speed Grade 9_High-Performance_1.0V Corner at -40 Degrees
3.1 Clock Summary
3.2 Endpoint slacks
3.3 Detailed Report
4 Hold at Speed Grade m Corner at -40 Degrees
4.1 Endpoint slacks
4.2 Detailed Report
=====================================================================
End of Table of Contents
=====================================================================
1 Timing Overview
1.1 SDC Constraints
1.2 Constraint Coverage
Constraint Coverage: 0%
1.3 Overall Summary
Setup at Speed Grade 9_High-Performance_1.0V Corner at 100 Degrees Timing Errors: 0 endpoints; Total Negative Slack: 0.000 ns
Setup at Speed Grade 9_High-Performance_1.0V Corner at -40 Degrees Timing Errors: 0 endpoints; Total Negative Slack: 0.000 ns
Hold at Speed Grade m Corner at -40 Degrees Timing Errors: 0 endpoints; Total Negative Slack: 0.000 ns
1.4 Unconstrained Report
1.4.1 Unconstrained Start/End Points
Clocked but unconstrained timing start points
--------------------------------------------------
There is no start point satisfying reporting criteria
Clocked but unconstrained timing end points
--------------------------------------------------
There is no end point satisfying reporting criteria
1.4.2 Start/End Points Without Timing Constraints
I/O ports without constraint
----------------------------
Possible constraints to use on I/O ports are:
set_input_delay,
set_output_delay,
set_max_delay,
create_clock,
create_generated_clock,
...
-------------------------------------------------------------------
Listing 5 Start or End Points | Type
-------------------------------------------------------------------
switch3 | input
switch2 | input
switch1 | input
led2 | output
led1 | output
-------------------------------------------------------------------
|
Number of I/O ports without constraint | 5
|
-------------------------------------------------------------------
Nets without clock definition
Define a clock on a top level port or a generated clock on a clock divider pin associated with this net(s).
--------------------------------------------------
There is no instance satisfying reporting criteria
1.5 Combinational Loop
None
2 Setup at Speed Grade 9_High-Performance_1.0V Corner at 100 Degrees
2.1 Clock Summary
2.2 Endpoint slacks
--------------------------------------------------
There is no end point satisfying reporting criteria
Total Negative Slack: 0
2.3 Detailed Report
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Detail report of critical paths
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Detailed Report for timing paths
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
End of Detailed Report for timing paths
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
##########################################################
3 Setup at Speed Grade 9_High-Performance_1.0V Corner at -40 Degrees
3.1 Clock Summary
3.2 Endpoint slacks
--------------------------------------------------
There is no end point satisfying reporting criteria
Total Negative Slack: 0
3.3 Detailed Report
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Detail report of critical paths
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Detailed Report for timing paths
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
End of Detailed Report for timing paths
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
##########################################################
4 Hold at Speed Grade m Corner at -40 Degrees
4.1 Endpoint slacks
--------------------------------------------------
There is no end point satisfying reporting criteria
Total Negative Slack: 0
4.2 Detailed Report
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Detail report of critical paths
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Detailed Report for timing paths
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
End of Detailed Report for timing paths
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
##########################################################